close
close

How To Hide Speaker Wire In Drywall. If you are having a wall mounting speakers, and you don’t want to cut a hole in the wall, or it is a rented property, and you are not permitted by the landlord to do so. You can then hide the wires with the matching paint of your wall.

Channel cut in drywall behind baseboards to hide cables
Channel cut in drywall behind baseboards to hide cables from www.youtube.com

Then cut a piece of basic speaker wire to the desired length. Tighten the binding posts securely using the provided plastic terminal wrench. Channel cut in drywall behind baseboards to hide cables.

If You Want Truly Invisible Yet Permanent Wire Placement And Avoid Cutting Holes Or Installing Wires Through Walls, Then A Flat Speaker Wire Tape Is The Best Option.

If you are having a wall mounting speakers, and you don’t want to cut a hole in the wall, or it is a rented property, and you are not permitted by the landlord to do so. One way of hiding speaker wires is to run them along a baseboard or other trim piece where they are secured with the nails or screws that hold them in place. Here are 5 solutions to hiding speaker wire.

A Surprisingly Attractive Solution For Hiding Or Disguising Surface Wiring Is To Sew A Tube (Or Tubes) Of Fabric That Is The Same As Or Coordinates With Your Drapes Or Upholsery, And Run The Wires Thru That With The Cloth Tube Attached Somehow To The Wall.

Pull the drill bit out and use it to pull up the string. Strips, then loosen the trim with a small pry bar, wrap the plastic around the. Then cut a piece of basic speaker wire to the desired length.

Every Place Your Wires Cross A Stud, Put A Small Metal Plate Over The Wires Running The Width Of The Stud.

Tuck the speaker wire under your baseboards. Tighten the binding posts securely using the provided plastic terminal wrench. Now insert the ¼ inch bare conductors into the two holes on the ghost wire terminal block and tighten them securely into place.

Continue Working Your Way Around Until All The Desired Speaker Wire Is Hidden.

If you were looking to put the speaker to the left of right of that existing hole, then you would have to do more work since there are studs to get past. Crown molding is an aesthetically pleasing addition to most rooms, but it ain’t the easiest project to do yourself. Feed the drill bit down to the bottom access hole, attach a string to the hole.

Check Out Part One, Where We Cut A Hole & Mount The Speaker On The Wall:

You can also buy external tools such as cable runners, cable holders, or ghost wires that will hide your wires. Slide the speaker wire in, and then push the carpet edge back down on the tack strip. Wipe down the area where you intend to run the wire with a damp cloth.

How To Hide Speaker Wire In Drywall
Tagged on:

Leave a Reply

Your email address will not be published.