How To Spray Paint Plastic Ornaments. Allow the clear paint to dry for 60 seconds and apply another clear coat. This should prep the surface and help the paint stick.
A spray primer applied to the underside of the plastic surface and top coat that is formulated for plastics will help to paint the surface. I already worked a little ombre spray paint magic with one of them last week. Chalky finish paint has great coverage after a single coat.
Table of Contents
Instructions Remove The Ornament Top.
Swish it around and let it dry. Follow the directions on the paint can to determine how many coats are best. Dip the tip of your paintbrush into one desired color and begin painting design onto the ornament.
Once Dry, Put The Hanger Back Into The Top Of The Ornament.
Follow the directions on the paint can to determine how many coats are best. After you have dried out the ornaments, put the hanger back on. Supplies needed to complete this project:(*links provided are affiliate li.
Once Your Ornaments Are Painted, Allow Them To Dry For 30 Minutes To An Hour.
If needed, dry completely in a muffin tin or egg carton. Cover top with your thumb and shake ornament. As long as there is still full coverage, shake for a short time.
There’s Probably A Better Way To Do It, Because My Ornaments Kept Rolling Around, Which Smudged The Paint And Picked Up Dust.
Continue shaking until full coverage is achieved. Apply spray paint designed specifically for plastic, such as krylon fusion spray paint for plastic. Spray light coats and then allow these coats to fully dry in between.
I Didn't Care About The Gold Top When I Was Spraying Either, But If You Do, You'll Have To Tape That Off.
Squirt some paint into the ornament. Fill a spray bottle with 1 part vinegar and 2 parts water. Apply the paint in two or three thin, even coats, allowing each coat to dry completely before applying the next.